# 登入區塊
帳號:

密碼:

自動登入 (請勿在公用電腦上登入時選擇「自動登入」選項,以防個人資料外洩。)

遺失密碼嗎?

何不馬上註冊!
# 主選單區塊
# 誰在線上區塊
 會員: 1
 訪客: 101

# 搜尋區塊
center   討論區主頁 » 閒聊區 一般話題版 » Good selection of European Windows無發表權

樹狀顯示 | 新的在前 前一個主題 | 下一個主題 | 頁尾
發表者 討論內容
chona
發表時間: 2020-06-11 16:37
Just popping in
註冊日: 2019-12-02
來自:
發表數: 2
[112175] Good selection of European Windows
First of all, in order to choose high-quality plastic Windows, pay attention to what window profile they are made of. It is the quality of the window profile that determines the appearance and durability of the window. Today, in most cases, we have to deal with Russian, Turkish or German manufacturers of window profiles. Window profiles made by German manufacturers are considered to be the highest quality. As a rule, the window profile of German production not only looks the most presentable at the time of purchase, but also has the ability to maintain all its technical characteristics at the highest level for many years. By purchasing this profile, you can be sure that it will withstand serious dynamic loads (for example, gusts of hurricane wind), and temperature loads (from +50C to-50C).
Good selection of European Windows https://glawindows.com/european-windows/
Pay attention to the number of air chambers in the window profile – in the Russian climate, you must use Windows with two, or even better – with three air chambers. What matters is the number of air chambers in the frame itself and in the window sash.

One of the main components of a window is a double-glazed window, so in order to choose the right plastic Windows, ask about its characteristics. The thickness of the double-glazed window must be at least 32 mm, and it must have at least two air chambers – otherwise, even a small winter frost will significantly reduce the level of thermal comfort in the house or apartment. Pay attention also to the brand of glass – high-quality glass should not give distortion or crack under small loads.

Choose only high-quality window fittings. Save on hardware is not worth it, since low-quality hardware can cause a lot more trouble than it can show at first glance. Leading manufacturers of metal-plastic Windows try to use only high-quality German fittings if possible.

Remember that the thermal insulation characteristics of a plastic window depend not only on the quality of the raw materials, but also on the accuracy of installation. Low-quality installation can almost completely neutralize the initially high technical characteristics of a high-quality manufactured window. Only with the correct and accurate measurement of the window opening, the window will not cause you any further inconvenience. As a rule, problems with the operation of the window in most cases arise precisely because of unprofessional installation. The cost of window installation services generally ranges from 10% to 20% of its total cost, so try to contact specialists you trust.
樹狀顯示 | 新的在前 前一個主題 | 下一個主題 | 頁首

無發表權
 

回首頁 | 新聞區 | 討論區 | 電子相簿 | 投票 | 網站連結 | 夥伴網站 | 文章分類